Announcement

Collapse
No announcement yet.

How to replace nose pads on eyeglasses?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to replace nose pads on eyeglasses?

    The nose pads on my glasses are broken and i get a replacement. But how do i replace them?

  • #2
    Before the replacement, you should go to the kit store to get new nose pads and a tiny screwdriver. Then you just use the tiny screwdriver to remove the old nose pads gently. Next, use a soft cloth to clean your glasses thoroughly including the lenses, frames and nose pads brackets. And then put the new nose pads into the brackets and insert the tiny screw. Finally, use the tiny screwdriver to insert the screws firmly.

    Comment


    • #3
      It is normal to break or dirty the nose pad of eyeglasses. Usually, most of people will buy a new pair of eyeglasses if their nose pads broken. But if you want to replace your nose pads, you shall use a screwdriver to remove your broken nose pads out of the glasses frames. Then, you can replace the eyeglasses with new nose pads. And use tiny screw to fix it.

      Comment


      • #4
        Firstly, lay a light colored towel on a plain place which is used to keep tiny pieces in place and provide a sharp color contrast in order that you can find the piece easier. Secondly, turn the connecting screws counter-clockwise for removal with a screwdriver slowly and carefully. Thirdly, line up a new nose pad with its connecting bracket, and insert the tiny screw. Turn the screw as far down as you can by hand, and then finish fixing them with the screwdriver. Fourthly, repeat the process with the second nose pad. At last, finish the glasses repairing by putting some clear nail polish or water-soluble white glue on the tip of the screw heads. Throughout the process, you must be very careful, because the parts are so tiny that they may be lost easily.

        Comment

        Working...
        X